Introduction
Hard water is a subtle issue in many homes, particularly in areas that have high mineral content water. It can appear harmless however, over time, it can harm your appliances in the home particularly the geyser. If your geyser is taking longer to heat up or makes odd noises, hard water damage on geyser might be the reason. This blog will help recognize the indications of water damage to your geyser with a simple explanation.
What is Hard Water?
Hard water refers to water that is high in levels of minerals, mostly magnesium and calcium. These minerals aren’t detrimental to health, but they could cause major problems with you heating system, pipes and appliances in your kitchen. When hot water is heated within a geyser it will leave behind chalky or white deposits, referred to by the name of limescale. As time passes, this accumulation results in the damage caused by hard water to geyser systems, which reduces the performance of geysers.
How Hard Water Affects Geysers
The geyser is able to heat water with an element of heating. When water that is hard flows through the geyser minerals adhere to the heating element. This forms an extremely dense layer of limescale that blocks heating elements from entering the geyser in a efficient way.
Here are some issues that can be that are caused by the hard water damage on geyser units:
- Heating is slower: It takes longer time to boil to the exact same quantity of water.
- More expensive electricity bills: A greater amount of energy is required to warm water.
- Overheating: can cause damage to internal parts.
- A shorter life span for geysers : You might require replacing your geyser before you expect it to.
Signs of Hard Water Damage on Your Geyser
Let’s look at the warning indicators that are clear to indicate your geyser may be in the grip of hard water.
1. Long Heating Time
If your geyser takes more time than normal to warm water, it could be due to the formation of limescale over the coil that is heating it. The coating acts as an insulation barrier, and it prevents the transfer of heat.
2. Strange sounds from the Geyser
Are you hearing the sound of crackling, popping and steaming sounds coming from your geyser? These sounds occur when trapped air bubbles are trying to escape by escaping an accumulation of limescale. This is among the most frequently observed symptoms for the damage caused by hard water to geyser systems.
3. Reduced Hot Water Output
It is possible that your geyser drains of hot water more quickly than it did before. This is because the limescale buildup diminishes the amount of space that is available in the tank for water to be stored.
4. White or Chalky Deposits
Pay attention to the outlet pipe for the geyser, or the faucet’s outlet pipe, where hot water flows out. If you notice white, particles, it’s an obvious sign of mineral buildup from hard water.
5. Uneven Water Temperature
If your geyser produces extremely hot water for a minute, and then the next, cold drinking water next time, this means the heating element isn’t operating in a uniform manner due to scaling.
6. High Electricity Bills
If you notice an abrupt rise in your electricity bill, but no other aspect of your usage has changed, your geyser could be consuming an extra amount of energy for heating thanks to the hard water deposits.
How to Confirm Hard Water Damage
It is not necessary to be an expert in order to determine whether you have hard water issues. Three easy methods:
- Make use of a water hardness test kit: The kits are inexpensive and can be found in hardware stores and on the internet. A reading that is high indicates your water is extremely hard.
- The geyser should be drained and examine the tank: If you find deposits of grey or white on the bottom, this is limescale.
- Get in touch with a professional technician or plumber: to inspect your geyser, and determine the presence of hard water on geyser components.
Preventive Measures for Hard Water Damage
Prevention of damage is always better then fixing the problem later. Here’s how you can safeguard your geyser from hard water.
1. Install a Water Softener or Filter
Too much calcium and magnesium are removed from the water by a water softener. It is possible to install it close to your geyser or the main water supply for your home.
2. Use a Magnetic or Electronic Descaler
These devices stop minerals from sticking to pipes and heating elements.They are easy to put up and require little maintenance.
3. Regular Maintenance
Clean your geyser at least every 3 months to eliminate the build-up of sediment. You can do it best water heater in yourself or contact a technician.
Hire a professional for cleaning and examine your geyser each year. They will be able to clean your heating elements, get rid of scale, and look for any signs of water damage caused by hard water to geyser systems.
When Should You Call a Professional?
If you spot any of the following indications:
- The smell of burning from the geyser
- Leaks of water from the unit
- The geyser shuts off often
- Lack of hot water despite frequent cleaning
it’s time to contact an expert immediately. If you ignore these warning signs, it could cause geyser to fail completely or even pose safety issues.
Conclusion
Hard water damage to geyser units is commonplace in many homes, and especially when the water quality is low. If you recognize the warning signs, such as the slow heating rate, strange sounds, or a decrease in hot water, you can take action promptly in order to reduce your expenses. A regular maintenance schedule, the use of softeners and professional assistance can prolong the lifespan that your water heater will last. If you’re in search of solid options that can handle hard water, make sure to opt for the best water heater in UAE, which comes with anti-scale technology as well as a long-lasting warranty.